UEE30820 Certificate III in Electrotechnology Electrician (CRICOS Code 108501D)

This qualification is delivered to overseas students fulltime integrating the following blended modes of delivery:

• Scheduled face to face class hours
• Online learning hours
• Self-study

This qualification is delivered twenty (20) hours per week, over a hundred and twenty nine (105) weeks + 24 weeks break – total 129 weeks.

Note: This course duration does not include indirect and supplementary workplace evidence hours but is required to obtain the qualification UEE30820 – Certificate III in Electrotechnology Electrician.

Volume of Learning

The volume of learning allocated to this qualification includes all teaching, learning and assessment activities that are required to be undertaken by the targeted student to achieve the learning outcomes of this qualification.

The volume of learning for UEE30820 Certificate III in Electrotechnology Electrician as a certificate III level qualification is typically delivered over    1 – 2 years (1200 – 2400 hours) based on unit of competency selection and the identified target market.

The Volume of Learning is 2,112 hours consisting of scheduled delivery, self-paced study; and 420 hours of project and workplace evidence additional to scheduled hours

Duration

Total duration for UEE30820 Certificate III in Electrotechnology Electrician is 2,532 hours over 129 weeks as follows:

• 105 weeks delivery and assessment
• 1,070 hours scheduled mandatory face to face classes

(10 hours per week during term time: theory, tutorial, assessment, practical – classroom and simulated Electrician environment)

• 622 hours online learning

(6 hours per week during term time)

• 420 hours self-paced learning

(4 hours per week during term time)

• 420 hours approximately of indirect and supplementary workplace evidence

(4 hours per week during term time additional to scheduled hours)
The students should be working in the industry to complete Workplace Evidence hours*

• 24 weeks break

The volume of learning allocated to a qualification will vary depending on the level of the qualification and the experience and competency of the student. Students must complete the allocated hours for the qualification they are undertaking in order to achieve competency. If the student applies for RPL or Credit Transfer, the volume of learning may be reduced.

• HLTAID001	Provide cardiopulmonary resuscitation
  UEECD0007	Apply work health and safety regulations, codes and practices in the workplace
  UEECD0016	Document and apply measures to control WHS risks associated with electrotechnology work
  UEECD0019	Fabricate, assemble and dismantle utilities industry components
  UEECD0020	Fix and secure electrotechnology equipment
  UEECD0044	Solve problems in multiple path circuits
  UEECD0046	Solve problems in single path circuits
  UEECD0051	Use drawings, diagrams, schedules, standards, codes and specifications
  UEECO0023	Participate in electrical work and competency development activities
  UEEEL0003	Arrange circuits, control and protection for electrical installations
  UEEEL0005	Develop and connect electrical control circuits
  UEEEL0008	Evaluate and modify low voltage heating equipment and controls
  UEEEL0009	Evaluate and modify low voltage lighting circuits, equipment and controls
  UEEEL0010	Evaluate and modify low voltage socket outlets circuits
  UEEEL0012	Install low voltage wiring, appliances, switchgear and associated accessories
  UEEEL0014	Isolate, test and troubleshoot low voltage electrical circuits
  UEEEL0018	Select wiring systems and select cables for low voltage electrical installations
  UEEEL0019	Solve problems in direct current (d.c.) machines
  UEEEL0020	Solve problems in low voltage a.c. circuits
  UEEEL0021	Solve problems in magnetic and electromagnetic devices
  UEEEL0023	Terminate cables, cords and accessories for low voltage circuits
  UEEEL0024	Test and connect alternating current (a.c.) rotating machines
  UEEEL0025	Test and connect transformers
  UEEEL0039	Design, install and verify compliance and functionality of general electrical installations
  UEEEL0047	Identify, shut down and restart systems with alternate supplies
  UEERE0001	Apply environmentally and sustainable procedures in the energy sector
  UETTDRRF06	Perform rescue from a live LV panel

  UEEDV0005	Install and maintain cabling for multiple access to telecommunication services
  UEEEL0033	Conduct electrical tests on LV electrical machines

The Google Business has just been created; it will take a while to collect the reviews.

After successfully completing this course, you will be able to:

• Identify occupational health and safety hazard and risks and documenting control measures. It encompasses identifying workplace hazards, assigning levels of risk, developing control measures to eliminate and/or mitigate risks, reviewing risk control measures and maintaining documentation of hazards, risk control measures and their application in accordance with compliance procedures.
• Inspect and test to verify whether an electrical installation is safe and complies with all requirements. It encompasses working safely, visual inspections and mandatory, optional, and functional testing following verification procedures, identifying non-compliance defects and mandatory reporting requirements.
• Select wiring systems and cables for electrical installations operating at voltages up to 1,000V a.c. or 1,500 V d.c
• Execute safe working practices, multi-phase circuit arrangements, issues related to fault protection, power factor and multiple earthed neutral (MEN) systems and solutions to circuit problems derived from calculated and measured parameters.

Applicants must have:

• Year 12 high school level completed or equivalent.
• A minimum English language proficiency of IELTS 6.0 or equivalent test recognised by DHA .
• Interview with STC staff
• Note: students in this course must have a job in the industry by the completion of term 2 and be under the supervision of a licensed tradesperson.