UEE30820 Certificate III in Electrotechnology Electrician (CRICOS Code 108501D)

UEE30820 Certificate III in Electrotechnology Electrician (CRICOS Code 108501D)

Costs

Tuition fee: $29,000

(Payment plan per term)

Enrolment fee: $250

Material fee: $1,100

Please Note: UEE30811 Certificate III in Electrotechnology Electrician is superseded 

This qualification provides individuals with the skills and knowledge to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises. It
includes Electrical Regulatory Authority Council (ERAC), or their successor’s, Essential Performance Capabilities for an ‘Unrestricted Electrician’s license’.
The skills and knowledge described in this qualification require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).

Competency development activities in this qualification are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training
through an Australian Apprenticeship, may be required. To obtain an Unrestricted Electrician’s Licence in most jurisdictions the qualification must be completed as an apprenticeship or Trades Recognition Australia (TRA) pathway.

Where required for Licencing, the certification documentation issued must indicate if the qualification was completed as an apprenticeship or Trades Recognition Australia (TRA) pathway.

This qualification is delivered to overseas students fulltime integrating the following blended modes of delivery:

  • Scheduled face to face class hours
  • Online learning hours
  • Self-study

This qualification is delivered twenty (20) hours per week, over a hundred and five (105) weeks + 24 weeks break.

Note: This course duration does not include indirect and supplementary workplace evidence hours but is required to obtain the qualification UEE30820 – Certificate III in Electrotechnology Electrician.

 

Volume of Learning

The volume of learning allocated to this qualification includes all teaching, learning and assessment activities that are required to be undertaken by the targeted student to achieve the learning outcomes of this qualification.

The volume of learning for UEE30820 Certificate III in Electrotechnology Electrician as a certificate III level qualification is typically delivered over    1 – 2 years (1200 – 2400 hours) based on unit of competency selection and the identified target market.

The Volume of Learning is 2,112 hours consisting of scheduled delivery, self-paced study; and 420 hours of project and workplace evidence additional to scheduled hours

Duration

Total duration for UEE30820 Certificate III in Electrotechnology Electrician is 2,532 hours over 129 weeks as follows:

  • 105 weeks delivery and assessment
  • 1,070 hours scheduled mandatory face to face classes

(10 hours per week during term time: theory, tutorial, assessment, practical – classroom and simulated Electrician environment)

  • 622 hours online learning

(6 hours per week during term time)

  • 420 hours self-paced learning

(4 hours per week during term time)

  • 420 hours approximately of indirect and supplementary workplace evidence

(4 hours per week during term time additional to scheduled hours)
The students should be working in the industry to complete Workplace Evidence hours*

  • 24 weeks break

The volume of learning allocated to a qualification will vary depending on the level of the qualification and the experience and competency of the student. Students must complete the allocated hours for the qualification they are undertaking in order to achieve competency. If the student applies for RPL or Credit Transfer, the volume of learning may be reduced.

 

 

  • HLTAID001

    Provide cardiopulmonary resuscitation

    UEECD0007

    Apply work health and safety regulations, codes and practices in the workplace

    UEECD0016

    Document and apply measures to control WHS risks associated with electrotechnology work

    UEECD0019

    Fabricate, assemble and dismantle utilities industry components

    UEECD0020

    Fix and secure electrotechnology equipment

    UEECD0044

    Solve problems in multiple path circuits

    UEECD0046

    Solve problems in single path circuits

    UEECD0051

    Use drawings, diagrams, schedules, standards, codes and specifications

    UEECO0023

    Participate in electrical work and competency development activities

    UEEEL0003

    Arrange circuits, control and protection for electrical installations

    UEEEL0005

    Develop and connect electrical control circuits

    UEEEL0008

    Evaluate and modify low voltage heating equipment and controls

    UEEEL0009

    Evaluate and modify low voltage lighting circuits, equipment and controls

    UEEEL0010

    Evaluate and modify low voltage socket outlets circuits

    UEEEL0012

    Install low voltage wiring, appliances, switchgear and associated accessories

    UEEEL0014

    Isolate, test and troubleshoot low voltage electrical circuits

    UEEEL0018

    Select wiring systems and select cables for low voltage electrical installations

    UEEEL0019

    Solve problems in direct current (d.c.) machines

    UEEEL0020

    Solve problems in low voltage a.c. circuits

    UEEEL0021

    Solve problems in magnetic and electromagnetic devices

    UEEEL0023

    Terminate cables, cords and accessories for low voltage circuits

    UEEEL0024

    Test and connect alternating current (a.c.) rotating machines

    UEEEL0025

    Test and connect transformers

    UEEEL0039

    Design, install and verify compliance and functionality of general electrical installations

    UEEEL0047

    Identify, shut down and restart systems with alternate supplies

    UEERE0001

    Apply environmentally and sustainable procedures in the energy sector

    UETTDRRF06

    Perform rescue from a live LV panel

    UEEDV0005

    Install and maintain cabling for multiple access to telecommunication services

    UEEEL0033

    Conduct electrical tests on LV electrical machines

The Google Business has just been created; it will take a while to collect the reviews.

After successfully completing this course, you will be able to:

  • Identify occupational health and safety hazard and risks and documenting control measures. It encompasses identifying workplace hazards, assigning levels of risk, developing control measures to eliminate and/or mitigate risks, reviewing risk control measures and maintaining documentation of hazards, risk control measures and their application in accordance with compliance procedures.
  • Inspect and test to verify whether an electrical installation is safe and complies with all requirements. It encompasses working safely, visual inspections and mandatory, optional, and functional testing following verification procedures, identifying non-compliance defects and mandatory reporting requirements.
  • Select wiring systems and cables for electrical installations operating at voltages up to 1,000V a.c. or 1,500 V d.c
  • Execute safe working practices, multi-phase circuit arrangements, issues related to fault protection, power factor and multiple earthed neutral (MEN) systems and solutions to circuit problems derived from calculated and measured parameters.

Applicants must have:

Start Course